SHIPShips

Our Hyper Dimming feature provides fine adjustment in brightness level (0–100%), meeting international standards and allowing use on ships, and we offer solutions that can be used in onboard surveillance systems.

  1. 01Bridge

    Electronic Nautical
    Chart Display System

    Monitor with Hyper Dimming technology that can adjust the brightness level

  2. 02Engine
    Controller

    Operation System

    Offering the functionality of IP65-level dust and water tightness, our monitors are very durable.

  3. 03Monitoring Room
    (Central Control Room)

    Monitoring Room
    (Central Control Room)

    HDSI monitors that connect to onboard surveillance cameras installed around the ship

Marine GradeElectronic Nautical Chart Display System

Monitor with Hyper Dimming technology
that can adjust the brightness level

Some special applications require monitors that can adjust the brightness level precisely.Hyper Dimming technology provides adjustments from fine tuning to a wide range of adjustment levels.This allows backlight control with very sensitive adjustments, supporting use of our LCD displays in a variety of environments.
<What is Hyper Dimming Technology?>
It is a light control technology that use a new PWM system (using semiconductors to control power) to enable a greater range of control than conventional analog systems.The standard methods of dimming CCFLs to date has been by regulating the current to the light or by regulating the current of the CCFL’s inverter.These adjustment methods restricted the range of adjustment in spite of the highly efficient circuit, and they put a load on the light.PWM (pulse width modulation) is a technology that solves these problems. It ensures excellent visibility by widening the range the brightness can be adjusted by regulating the amount of current required by the backlight and its operating time.

Product Lineup

Panel Mount Front IP65Operation System

Offering the functionality of IP65-level dust and water tightness,
our monitors are very durable.

Our housing designs can offer a variety of performance levels in water and dust resistance.For products required for monitoring, we don’t just seal the bezel to the front, but rather attach a waterproof rubber seal at points the bezel touches the mounting frame, to integrate it with the device.Under IP65 standards, we set reinforced glass into a 10 mm thick front bezel, and we can design systems that are resistant to heat and vibration as well.

Product Lineup

CCTVMonitoring Room (Central Control Room)

HDSI monitors that connect to onboard surveillance cameras installed
around the ship

In the interest of dealing with piracy and meeting the requirements of the ISPS code (international ship and port facility security code), more and more surveillance HDSDI cameras are being installed on vessels, such as in restricted access areas, gangways, the bridge, engine control rooms, etc.This is because the existing analog camera wiring can be used as-is and as they feature high image-quality and little video delay.These HDSDI monitors use conventional RG-6 coaxial cable to display in real time without image degradation.Further, as SDI is equipped with a bridge output, it simplifies system architecture.

Product Lineup